路由状态命令

路由状态命令

Dubbo 的很多流量治理能力是基于 Router 进行实现的，在生产环境中，如果出现流量结果不符合预期的情况，可以通过路由状态命令来查看路由的状态，以此来定位可能存在的问题。

参考链接：路由状态采集

getRouterSnapshot 命令

获取当前的每层路由的分组状态。（仅支持 StateRouter）

命令：getRouterSnapshot {serviceName}

serviceName 为需要采集的服务名，支持匹配

dubbo>getRouterSnapshot com.dubbo.dubbointegration.BackendService
com.dubbo.dubbointegration.BackendService@2c2e824a
[ All Invokers:2 ] [ Valid Invokers: 2 ]

MockInvokersSelector  Total: 2
[ Mocked -> Empty (Total: 0) ]
[ Normal -> 172.18.111.187:20880,172.18.111.183:20880 (Total: 2) ]
            ↓ 
StandardMeshRuleRouter not support
            ↓ 
TagStateRouter not support
            ↓ 
ServiceStateRouter not support
            ↓ 
AppStateRouter not support
            ↓ 
TailStateRouter End


dubbo>

enableRouterSnapshot 命令

开启路由结果采集模式

命令：enableRouterSnapshot {serviceName}

serviceName 为需要采集的服务名，支持匹配

dubbo>enableRouterSnapshot com.dubbo.*
OK. Found service count: 1. This will cause performance degradation, please be careful!

dubbo>

disableRouterSnapshot 命令

关闭路由结果采集模式

命令：disableRouterSnapshot {serviceName}

serviceName 为需要采集的服务名，支持匹配

dubbo>disableRouterSnapshot com.dubbo.*
OK. Found service count: 1

dubbo>

getEnabledRouterSnapshot 命令

获取当前已经开启采集的服务

dubbo>getEnabledRouterSnapshot
com.dubbo.dubbointegration.BackendService

dubbo>

getRecentRouterSnapshot 命令

通过 qos 命令获取历史的路由状态。（最多存储 32 个结果）

dubbo>getRecentRouterSnapshot
1658224330156 - Router snapshot service com.dubbo.dubbointegration.BackendService from registry 172.18.111.184 on the consumer 172.18.111.184 using the dubbo version 3.0.9 is below: 
[ Parent (Input: 2) (Current Node Output: 2) (Chain Node Output: 2) ] Input: 172.18.111.187:20880,172.18.111.183:20880 -> Chain Node Output: 172.18.111.187:20880,172.18.111.183:20880
  [ MockInvokersSelector (Input: 2) (Current Node Output: 2) (Chain Node Output: 2) Router message: invocation.need.mock not set. Return normal Invokers. ] Current Node Output: 172.18.111.187:20880,172.18.111.183:20880
    [ StandardMeshRuleRouter (Input: 2) (Current Node Output: 2) (Chain Node Output: 2) Router message: MeshRuleCache has not been built. Skip route. ] Current Node Output: 172.18.111.187:20880,172.18.111.183:20880
      [ TagStateRouter (Input: 2) (Current Node Output: 2) (Chain Node Output: 2) Router message: Disable Tag Router. Reason: tagRouterRule is invalid or disabled ] Current Node Output: 172.18.111.187:20880,172.18.111.183:20880
        [ ServiceStateRouter (Input: 2) (Current Node Output: 2) (Chain Node Output: 2) Router message: Directly return. Reason: Invokers from previous router is empty or conditionRouters is empty. ] Current Node Output: 172.18.111.187:20880,172.18.111.183:20880
          [ AppStateRouter (Input: 2) (Current Node Output: 2) (Chain Node Output: 2) Router message: Directly return. Reason: Invokers from previous router is empty or conditionRouters is empty. ] Current Node Output: 172.18.111.187:20880,172.18.111.183:20880

1658224330156 - Router snapshot service com.dubbo.dubbointegration.BackendService from registry 172.18.111.184 on the consumer 172.18.111.184 using the dubbo version 3.0.9 is below: 
[ Parent (Input: 2) (Current Node Output: 2) (Chain Node Output: 2) ] Input: 172.18.111.187:20880,172.18.111.183:20880 -> Chain Node Output: 172.18.111.187:20880,172.18.111.183:20880
  [ MockInvokersSelector (Input: 2) (Current Node Output: 2) (Chain Node Output: 2) Router message: invocation.need.mock not set. Return normal Invokers. ] Current Node Output: 172.18.111.187:20880,172.18.111.183:20880
    [ StandardMeshRuleRouter (Input: 2) (Current Node Output: 2) (Chain Node Output: 2) Router message: MeshRuleCache has not been built. Skip route. ] Current Node Output: 172.18.111.187:20880,172.18.111.183:20880
      [ TagStateRouter (Input: 2) (Current Node Output: 2) (Chain Node Output: 2) Router message: Disable Tag Router. Reason: tagRouterRule is invalid or disabled ] Current Node Output: 172.18.111.187:20880,172.18.111.183:20880
        [ ServiceStateRouter (Input: 2) (Current Node Output: 2) (Chain Node Output: 2) Router message: Directly return. Reason: Invokers from previous router is empty or conditionRouters is empty. ] Current Node Output: 172.18.111.187:20880,172.18.111.183:20880
          [ AppStateRouter (Input: 2) (Current Node Output: 2) (Chain Node Output: 2) Router message: Directly return. Reason: Invokers from previous router is empty or conditionRouters is empty. ] Current Node Output: 172.18.111.187:20880,172.18.111.183:20880

···

dubbo>

最后修改 January 28, 2023: Update router-snapshot.md (#1939) (383cd28e0)