Introduction to Dubbo Routing (router) Mechanism and How It Implements Traffic Control

Dubbo’s traffic control rules can precisely control traffic direction based on application, service, method, parameter, etc., matching the target service, method, and other additional parameters in the request body. Traffic that meets the matching conditions will be further forwarded to a subset of addresses according to specific rules.

Dubbo provides a rich set of traffic control strategies:

  • Address discovery and load balancing: Address discovery supports dynamic service instance registration and deregistration, and load balancing ensures that traffic is evenly distributed across each instance.
  • Traffic control based on routing rules: Routing rules match each request based on conditions and route matching requests to a specific subset of addresses.

Service discovery ensures that the caller sees the latest provider instance addresses. The service discovery mechanism relies on the registry (Zookeeper, Nacos, Istio, etc.). On the consumer side, Dubbo provides various load balancing strategies, such as random load balancing, consistent hash load balancing, weight-based round-robin, least active priority, P2C, etc.

Dubbo’s traffic control rules can precisely control traffic direction based on application, service, method, parameter, etc., matching the target service, method, and other additional parameters in the request body. Traffic that meets the matching conditions will be further forwarded to a subset of addresses according to specific rules. The traffic control rules include:

  • Conditional routing rules
  • Tag routing rules
  • Script routing rules
  • Dynamic configuration rules

If the underlying protocol is an HTTP-based RPC protocol (such as REST, gRPC, Triple, etc.), then services and methods are uniformly mapped to HTTP paths. In this case, Dubbo’s routing rules are equivalent to traffic distribution mechanisms based on HTTP paths and headers.

In Dubbo, there are concepts of applications, services, and methods. An application can publish multiple services, and a service contains multiple callable methods. From an abstract perspective, a Dubbo call is an invocation of a specific method of a service within a provider application initiated by a consumer application. Dubbo’s traffic control rules can precisely control traffic direction based on application, service, method, parameter, etc.

Router Working Principle

The following describes the working process of a single router in Dubbo. The router receives a set of instance addresses of a service as input, matches the input addresses based on the request context and the actual routing rule definitions, and forms a subset of addresses from all successfully matched instances. The final address subset is then passed to the next router or load balancing component for further processing.

Router

Typically, in Dubbo, multiple routers form a routing chain that works together. The output of the previous router serves as the input for the next router. After layer-by-layer routing rule filtering, an effective address set is finally generated.

  • Each service in Dubbo has a completely independent routing chain. The composition of the routing chain for each service may vary, and the rules processed are different, with no mutual influence between services.
  • For a single routing chain, even if the input address set is the same each time, the resulting address subset may differ based on the request context.

Router

Classification of Routing Rules

Tag Routing Rules

Tag routing divides instances of a service into different groups, constraining traffic with specific tags to flow only within designated groups. Different groups serve different traffic scenarios, achieving traffic isolation. Tag routing can serve as the foundation for scenarios such as blue-green deployment and canary release.

Tag routing rules are an either-or traffic isolation solution, meaning requests matching a tag will be 100% forwarded to instances with the same tag, and requests not matching a tag will be 100% forwarded to the remaining unmatched instances. If you need a proportional traffic scheduling solution, please refer to the example Proportional Traffic Routing Based on Weight.

Tags mainly refer to the grouping of provider-side application instances. Currently, there are two ways to complete instance grouping: dynamic rule tagging and static rule tagging. Dynamic rule tagging can dynamically enclose a group of machine instances at runtime, while static rule tagging requires instance restart to take effect. Among them, dynamic rules have a higher priority than static rules, and when both rules exist and conflict, dynamic rules will prevail.

Tag Rule Example - Static Tagging

Static tagging needs to be determined before the service provider instance starts and must be specified through a specific parameter tag.

Provider

Before the Dubbo instance starts, specify the tag for the current instance, such as specifying tag=gray for instances deployed in the Hangzhou region.

<dubbo:provider tag="gray"/>

or

<dubbo:service tag="gray"/>

or

java -jar xxx-provider.jar -Ddubbo.provider.tag=gray
Consumer

The party initiating the call sets the traffic tag through tag before each request to ensure that the traffic is routed to the service provider with the same tag.

RpcContext.getContext().setAttachment(Constants.TAG_KEY, "gray");

Tag Rule Example - Dynamic Tagging

Compared to static tagging which can only be set through the tag attribute and is fixed at startup, dynamic tags can match any number of attributes and dynamically divide Provider instances into different traffic groups based on specified matching conditions.

Provider

The following rule dynamically groups the shop-detail application, where instances matching env: gray are grouped into the gray group, and those not matching env: gray remain in the default group (no tag).

configVersion: v3.0
force: true
enabled: true
key: shop-detail
tags:
  - name: gray
    match:
      - key: env
        value:
          exact: gray

This involves how to label your instances with various original labels, such as env in the example above. One way is to write it directly in the configuration file, as shown in the static rule example provider section above. Another way is to specify it through preset environment variables. For more details, please refer to the section How to Label Instances below.

Consumer

The settings for the service initiator remain the same as the static tagging rules. You only need to set the traffic tag through tag before each request to ensure that the traffic is routed to the service provider with the same tag.

RpcContext.getContext().setAttachment(Constants.TAG_KEY, "Hangzhou");

Traffic with the above tag will be routed to instances divided by the hangzhou-region.

The scope of the request tag is limited to a single point-to-point RPC request. For example, in an A -> B -> C call chain, if the A -> B call sets the tag parameter through setAttachment, this parameter will not be effective in the B -> C call. Similarly, after completing the entire A -> B -> C call and A receives the result, if you want the same tag parameter, you still need to set setAttachment separately before initiating other calls. You can refer to Example Task - Environment Isolation to learn more about the full-link transmission solution of tag.

Conditional Routing Rules

Conditional routing works similarly to tag routing. It first matches the parameters in the request, and requests that meet the matching conditions are forwarded to a subset of specific instance addresses. Compared to tag routing, conditional routing is more flexible in its matching method:

  • In tag routing, once a tag is assigned to one or several machine instances, those instances are immediately removed from the general traffic pool, and there is no overlap between different tags. It’s somewhat like the diagram below, where the address set is clearly divided at the input stage.

tag-condition-compare

  • From the perspective of conditional routing, all instances are consistent, and there is no grouping isolation during the routing process. Each routing filter is executed based on the full address set.

tag-condition-compare

The main content of the conditional routing rule conditions includes two parts:

  • The part before => is the request parameter matching condition. The specified matching condition parameter will be compared with the consumer's request context (URL) or even method parameters. When the consumer meets the matching condition, the address subset filtering rule after => is executed for that consumer.
  • The part after => is the address subset filtering condition. The specified filtering condition parameter will be compared with the provider instance address (URL). The consumer will ultimately get a list of instances that meet the filtering conditions, ensuring that traffic is only sent to the address subset that meets the conditions.
    • If the matching condition is empty, it applies to all requests, such as: => status != staging
    • If the filtering condition is empty, it prohibits access from the corresponding request, such as: application = product =>

Conditional Routing Rule Example

Based on the following example rule, all org.apache.dubbo.demo.CommentService service calls will be forwarded to the address subset with the same region tag as the current consumer machine. $region is a special reference symbol that will be replaced with the actual region value of the consumer machine during execution.

configVersion: v3.0
enabled: true
force: false
key: org.apache.dubbo.samples.CommentService
conditions:
  - '=> region = $region'

For conditional routing, we usually recommend configuring rules with scope: service because it can apply to all applications consuming a specific service across different consumers. For more information about scope and service, application in Dubbo rules, please read the Conditional Routing Rule Manual.

Conditional routing rules also support setting specific machine addresses such as IP or port. In such cases, conditional routing can handle temporary situations for development or production machines, achieving operational effects like blacklisting, whitelisting, temporary instance removal, etc. For example, the following rule can exclude the machine 172.22.3.91 from the service’s available list.

=> host != 172.22.3.91

Conditional routing also supports matching based on request parameters, as shown in the following example:

conditions:
  - method=getDetail&arguments[0]=dubbo => port=20880

Dynamic Configuration Rules

With the dynamic configuration rules provided by Dubbo, you can dynamically modify the runtime behavior of Dubbo service processes without restarting, and the configuration parameters take effect immediately. Based on this powerful feature, almost all runtime parameters can be dynamically adjusted, such as timeout settings, temporarily enabling Access Log, modifying Tracing sampling rate, adjusting rate limiting and degradation parameters, load balancing, thread pool configuration, log levels, dynamically tagging machine instances, etc. Similar to the traffic control rules mentioned above, dynamic configuration rules support both application and service granularity, meaning you can choose to adjust the parameter configuration of one or several services within an application at a time.

Of course, for the sake of system stability and security, some specific parameters are not allowed to be dynamically modified. But other than that, almost all parameters can be dynamically modified, and many powerful runtime capabilities can be achieved through this rule. You can try it out with a sample application. Usually, the parameters in the URL address can be modified, and more detailed explanations are recorded in the reference manuals for each language implementation.

Dynamic Configuration Rule Example - Modifying Timeout

The following example adjusts the timeout parameter of the org.apache.dubbo.samples.UserService service to 2000ms

configVersion: v3.0
scope: service
key: org.apache.dubbo.samples.UserService
enabled: true
configs:
  - side: provider
    parameters:
      timeout: 2000

The following section specifies that this configuration is at the service granularity, and the specific service name to be changed is org.apache.dubbo.samples.UserService. scope supports two optional values: service and application. If scope: service, then key should be configured in the version/service:group format.

scope: service
key: org.apache.dubbo.samples.UserService

For more information about scope and service, application in Dubbo rules, please refer to the Dynamic Configuration Reference Manual or Dynamic Configuration Example.

The parameters parameter specifies the new modification value. Here, the timeout is set to 2000ms through timeout: 2000.

parameters:
 timeout: 2000

Script Routing Rules

Script routing is the most intuitive routing method, and it is also the most flexible routing rule currently available because you can define any address filtering rules in the script. If we define a script rule for a service, all subsequent requests will first execute this script, and the addresses filtered out by the script will be the valid addresses to which the request is allowed to be sent.

configVersion: v3.0
key: demo-provider
type: javascript
enabled: true
script: |
  (function route(invokers,invocation,context) {
      var result = new java.util.ArrayList(invokers.size());
      for (i = 0; i < invokers.size(); i ++) {
          if ("10.20.3.3".equals(invokers.get(i).getUrl().getHost())) {
              result.add(invokers.get(i));
          }
      }
      return result;
  } (invokers, invocation, context));  

How to Tag Instances

Currently, there are two ways to specify tags for Dubbo instances at startup. One way is the previously mentioned method of configuring within the application, such as setting <dubbo:provider tag="gray"/> in the XML file, and the application will be automatically tagged after packaging and deployment.

Another more flexible way is to tag the application by reading the environment information of the deployed machine. This way, the application’s tags can dynamically and automatically populate with the instance, avoiding the need to repackage the application image every time the deployment environment changes. Currently, Dubbo can automatically read the following environment variable configurations:

spec:
  containers:
  - name: detail
    image: apache/demo-detail:latest
    env:
    - name: DUBBO_LABELS
      value: "region=hangzhou; env=gray"
spec:
  containers:
  - name: detail
    image: apache/demo-detail:latest
    env:
    - name: DUBBO_ENV_KEYS
      value: "REGION, ENV"
    - name: REGION
      value: "hangzhou"
    - name: ENV
      value: "gray"

If you have a different instance environment preservation mechanism, you can customize your own tag loading method by extending the InfraAdapter extension point. If your application is deployed in a Kubernetes environment and has already integrated with the service mesh system, you can also use the standard deployment tag method for tagging. For details, please follow the Service Mesh Task Example.


## How to Configure Traffic Rules
Dubbo provides a console called Dubbo Admin to help you visualize and issue traffic control rules, and monitor the effectiveness of the rules in real-time.

![Admin](/imgs/v3/what/admin.png)

Dubbo also provides a command-line tool called `dubboctl`. Dubbo Admin needs to be deployed in advance because dubboctl issues rules through HTTP communication with Admin.

If you are using a service mesh architecture like Istio, you can also use Istioctl, kubectl, etc., to issue Istio standard rules.

## Integrating with Service Mesh

The above introduces traffic governance rules within the Dubbo system. If you are interested in service mesh architecture, you can integrate Dubbo services into the service mesh system. This way, you can use the traffic governance capabilities provided by the service mesh, such as Istio's VirtualService.

For details, please refer to [Service Mesh Architecture in Dubbo](../service-mesh).

## Learn by Example
We have set up an [online shopping system](../../tasks/traffic-management/) for you to learn the specific usage of traffic rules.